This is a E-ink Display, 2.13 inch, supports 0.4s partial refresh, with 250x122 resolution, SPI interface, 4 Gray Level and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-ink modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEQ0213B74 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-ink Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this e-ink on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
PART NUMBER |
GDEQ0213B74 |
||
TYPE |
Dot Matrix |
CONNECTOR | 24 Pin FPC |
SIZE |
2.13 inch |
MAX GRAYSCALE | 4 |
IC |
SSD1680Z8 |
COLOR | Black,White |
RESOLUTION |
250x122 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
59.2x29.2x0.926 |
FULL REFRESH(s) | 3 |
ACTIVE SIZE(mm) |
48.55x23.7046 |
PARTIAL REFRESH TIME(s) | 0.4 |
PIXEL PITCH(mm) |
0.1943x0.1942 |
POWER CONSUMPTION OF THE REFRESH(mW) | 9 |
OPERATING TEMP. |
0℃~50℃ |
STANDBY POWER CONSUMPTION (mW) | 0.003 |
STORAGE TEMP. |
-25℃~70℃ |
● Support 4 Grayscale
● Wide Viewing. Near 180°.
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.4s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Low power consumption. Once these e-paper modules are updated they don't require any power
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)