☆ INTRODUCTION
This is a 1.54 inch e-ink display with 200x200 resolution, SPI interface, and the display is capable to display images with black and white content. It supports 2s full refresh and 0.26s partial refresh. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This electronic paper display GDEY0154D67 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
* Note: We can customize the OTP code to make the refresh time of this 1.54 inch e-paper display GDEY0154D67 reach to 1.5s, if you need, please contact us.
PART NUMBER |
GDEY0154D67 |
||
SIZE | 1.54 inch | MAX GRAYSCALE | 4 |
DISPLAY FORMAT |
200x200 |
INTERFACE | SPI |
IC | SSD1681 | POWER CONSUMPTION OF THE REFRESH(mW) | 4.5 |
OUTLINE DIMENSION(mm) |
37.32x31.8x1 |
STANDBY POWER CONSUMPTION (mW) | 0.003 |
ACTIVE AREA(mm) |
27x27 |
FULL REFRESH(s) | 2 |
OPERATING TEMP. |
0℃~50℃ |
PARTIAL REFRESH TIME(s) | 0.26 |
STORAGE TEMP. |
-25℃~70℃ |
COLOR | Black, White |
● Customizable 1.5s Fast Refresh
● Black and white monochrome is easy to read.
● Versatile. Use in portrait or landscape format.
● It supports partial refresh, the refresh rate is 0.26s/frame.
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor.
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-PICO (Rasberry Pi Epaper HAT)
● GDEY0154D67 Specification
● IC Driver SSD1681
● GDEY0154D67 Picture Production and Bitmap Conversion
● GDEY0154D67 STM32 Sample Code
● GDEY0154D67 Arduino Sample Code
● GDEY0154D67 Raspberry Pi Pico Sample Code
● GDEY0154D67 ESP32 Sample Code
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].