Your position: Home / E-PAPER DISPLAY / EPD MODULE

1.54 inch e-paper module GDEH0154D67 e-ink paper 200x200 display, DESPI-K154D67

DESPI-K154D67 is designed for 1.54 inch SPI e-paper display GDEH0154D67. It can boost the driving voltage of Good Display's 1.54 inch e-paper display.
1 Review(s) Sold:2
Price:
USD
$23.24
Quantity:
-
+
(59 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Library
  • Reviews(1)

Any questions, just feel free to contact me, my email is: info@good-display.com
 

 

☆ INTRODUCTION


 

DESPI-K154D67 is designed for 1.54 inch e-paper e-ink 200x200 display GDEH0154D67. It can boost the driving voltage of Good Display's 1.54 inch e-paper display. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. 

Also it preserves interfaces for 6 Pin touch panel and 6 Pin front light, which users can test. And this module board contains a Flash chip W25Q128 which is a serial NOR Flash memory with capacity of 128M-bit(16M-byte), making it easier for users to store pictures, libraries and other related data. And SD card slot is also reserved in the module, which users can choose to add an extra micro SD card. Therefore, Flash chip and SD card slot address the user need for more storage.
 

We also have other 24 Pin 1.54 e-ink paper modules, if you have any needs, please contact us.
 

Relevant manual about this product on our official website (www.good-display.com), contact us please.



 

 THE ABOVE PRICE INCLUDE



1) 1.54 inch e-paper module GDEH0154D67 e-ink paper 200x200 display * 1pc






 

 MAIN PARAMETERS


 

PART NUMBER

DESPI-K154D67

 

PLATFORM

STM32、Arduino、ESP32、ESP8266、Raspberry Pi、Raspberry Pi Pico

MAIN FUNCTION Provide driving voltage for e-paper, touch panel and front light panel;
Help users operate e-paper quickly.

OUTSIDE DIMENSION(mm)

41.8x37.32

ADDITIONAL FUNCTION

Flash;

Micro SD;

LED;

IC

SSD1681

MAX GRAYSCALE 4

RESOLUTION

200x200

COLOR Black,White

POWER INTERFACE

3.3V

INTERFACE SPI

ACTIVE SIZE(mm)

27x27

FULL REFRESH(s) 2

OPERATING TEMP.

0℃~50℃

PARTIAL REFRESH TIME(s) 0.26








 

 FEATURE


 

●  SPI interface. It can be used on Raspberry Pi/Raspberry Pi Pico/ Arduino/ EPS8266/ ESP32/ STM32 Platform. We could provide the driving board, if you need, contact us please.
●   It integrated Flash chip and SD card slots for expanded development
●   Help users to learn how to drive the EPD with 6 PIN touch panel and 6 PIN front light

●   It has 3 LED lights, each LED light can be directly controled by the expansion pins. (Please refer to the PIN description.)

            





 

☆ ABOUT US



Please feel free to contact us for any questions, on trademanager, or send message to me. It's our pleasure to serve you! We appreciate your business!!
My email is: info@good-display.com


 

 

 SPECIFICATION DOWNLOAD


 

1)  DESPI-K154 Specification
2)  DESPI-K154-SCH

3)  GDEH0154D67 Specification
4)  IC Driver SSD1681 Datasheet
5)  GDEH0154D67 Bitmap Conversion
6)  GDEH0154D67 STM32 Sample Code
7)  GDEH0154D67 Arduino Sample Code
8)  GDEH0154D67 Raspberry Pi Sample Code
9)  GDEH0154D67 ESP8266 Sample Code
10)  GDEH0154D67 ESP32 Sample Code
11)  GDEH0154D67 Raspberry Pi Pico Sample Code







 

☆ PINS FOR EPD MODULE


 

1. Pins for EPD

1) BUSY: BUSY signal of e-paper. When the e-paper is refreshing, the BUSY pin sends out "busy" signal to MCU, the MCU can not read and write the e-paper IC; When the e-paper refresh is completed, the BUSY pin sends out "free" signal, the MCU can read and write the e-paper IC. GDEW series e-paper busy state is high level (GDEH series is low level), and free state is opposite.

2) RES: Reset signal of e-paper. Low level effective.

3) D/C: Data/ Command selection. High level for data, low level for command.

4) CS: Chip selection. Low level effective.

5) SCK: SPI serial communication clock signal line.

6) SDI: SPI serial communication data signal line.

7) GND: Negative power supply.

8) 3.3V: Positive power supply

 

2. Expanded Pins

1)  SI: Master Output Slave Input for SPI: INT pin for TP.

2)  SO: Master Input Slave Output for SPI: RST pin for TP.

3)  SCK: Clock signal line for SPI: SCL pin for TP.

4)  CS0: Chip selection for Flash: SDA pin for TP.

5)  CS1: Chip selection for SD.

6)  LED1: Control pin for LED1.

7)  LED2: Control pin for LED2.

8)  LED3: Control pin for LED3.

 

 

 

 

 

Average rating: 5.0 based on 1 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login