This is a 2.13 inch flexible e-paper display use the flexible substrate as base plate, with 212x104 resolution, SPI interface, and the display is capable to display images with black and white content. It supports 3s full refresh and 0.3s partial refresh. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEW0213I5FD is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
1) 2.13 inch e-paper display flexible ultra-thin partial refresh 4 Grayscale eink screen, GDEW0213I5FD * 1pc
2) FPC Connector * 1pc
PART NUMBER |
GDEW0213I5FD |
||
TYPE |
Dot Matrix |
CONNECTOR | 24 Pin FPC |
SIZE |
2.13 inch |
MAX GRAYSCALE | 4 |
IC |
UC8151D |
COLOR | Black,White |
RESOLUTION |
212x104 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
59.2x29.2x0.3 |
FULL REFRESH(s) | 3 |
ACTIVE SIZE(mm) |
48.55x23.71 |
PARTIAL REFRESH TIME(s) | 0.3 |
PIXEL PITCH(mm) |
0.229x0.228 |
POWER CONSUMPTION OF THE REFRESH(mW) | 26.4 |
OPERATING TEMP. |
0℃~50℃ |
STANDBY POWER CONSUMPTION (mW) | 0.0165 |
STORAGE TEMP. |
-25℃~70℃ |
● Support 4 Grayscale
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports small bending because its flexible feature
● It supports partial refresh, the refresh rate is 0.3s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32 / Arduino / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● GDEW0213I5FD Specification
● IC Driver UC8151D
● IC UC8151C to IC UC8151D Instructions
● Picture Production and Bitmap Convert for GDEW0213I5FD
● GDEW0213I5FD STM32 Sample Code
● GDEW0213I5FD Arduino Sample Code
● GDEW0213I5FD ESP8266 Sample Code
● GDEW0213I5FD ESP32 Sample Code
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].